eHow.com Video: Separating The Area In A Studio Apartment By Using A Curtain

Separating the Area in a Studio Apartment by Using a Curtain

Separating the Area in a Studio Apartment by Using a Curtain

This is for you urbanites living in studio apartments.  I know how it is!! I lived in one for many years.  Learn how to separate your space with a curtain

see more eHow.com videos here

Video transcript:

Hello, I'm Anjie Cho, and today I will share with you some tips to separate an area in a studio apartment by using a curtain.

The most challenging aspect of living in a studio apartment is separating your public active space such as your living, dining, kitchen and work areas from your private passive sleeping area. It's very important to visually and physically separate your sleep and public areas when designing the layout of your studio apartment. 

One way you can achieve this is with curtains. In this example I've used a ceiling mounted curtain track. There are also curtain wires that will work but in my experience, depending on how long the span is, the wire will begin to droop with the weight of the curtain and this doesn't look good. The ceiling mounted curtain tracks and rails are rigid and end up looking the cleanest. Regular curtain rods will also work well if you can mount the supports on the ceiling.

Make sure you get the correct types of screws and anchors for the ceiling you have. I have concrete slab ceilings here so I used a hammering drill and concrete anchors. Be sure to measure out the space you have so the holes are located correctly. In this application I used a semi opaque fabric so there is visual for that privacy but you still see some light pass through. If sound is an issue, it might be better to use a heavier fabric. The other advantage of drapes is flexibility. When you need more space you can open it up like this because after all a studio is a small living space.

I'm Anjie Cho, and this is how to separate areas in a studio apartment by using a curtain.

by Anjie Cho


Why Switch to CFL Bulbs?

Why NOT switch to CFL Bulbs?

In preparation for this article, I took a survey amongst my friends. I wasn’t sure how relevant the topic was since I personally made the switch to energy efficient lighting years ago.  So, I took a survey and I asked, “Do you think most households have switched to using CFL bulbs?” 

I found out that the topic of CFL bulbs was very controversial!  Here are some of the responses I’ve received:

- Yes, they believe most people have switched to CFL bulbs.  And this is possibly because “most people don’t realize they have switched to CFLS”.  Interesting because the newer CFL bulbs look a lot like incandescents and also people just really don’t pay attention to what they’re buying.

- Yes, “can you even buy incandescent anymore?”  (Note: yes you can, but they will soon be banned and obsolete)

- Another said, “Maybe half of the households in the US, considering that incandescent bulbs are still a fraction of the cost of CFLS”.  True true.

- One response was “I certainly hope not. They're horrible.” In fact this friend then insisted he wanted to write his own competing speech in the “battle of the bulbs”. 

I wholeheartedly believe in switching to energy efficient lighting because not only do incandescent bulbs waste money, they also deplete our precious natural resources.  So here I am, standing on my little soapbox to convince my readers to participate in one small step to green our planet and individual lives.

So why switch to CFL bulbs?  CFLs are the easiest and least expensive way to upgrade to efficient lighting in your home.

First I’ll explain the basic differences between CFL and standard incandescent bulbs.  Standard incandescent bulbs produce light when an electric current passes through a filament and causes it to glow.  This creates heat and light.  But it’s pretty inefficient because you lose a lot of energy to the heat.

CFL stands for compact fluorescent light.  They are those squiggly bulbs.  In comparison to incandescent bulbs, an electric current is driven through the squiggly tube which contains argon and a small amount of mercury to emit a visible light.   By the way, argon is an inert, non-toxic gas and of course we know mercury is a heavy metal.  The mercury is safe as long as the tube does not break and is recycled of properly.  Home Depot and Ikea both have free CFL recycling programs.

More importantly, a CFL bulb uses about 75% less energy than an incandescent bulb.  For instance a 13 watt CFL bulb gives of the same amount of light as a 60 watt incandescent.  So you save a lot of energy. 

Next, what about upfront cost?  A CFL light is just a couple of dollars more and they’re very easy to find at your local hardware store. 

And what about cost over time?  A good CFL will last approximately 10,000 hours, whereas an incandescent lasts only 1,000 hours.  So you save lot of money (and energy) there too.

Finally, Some people are concerned about the look of the bulb as well as the quality of light.  CFLs have a bad rap because they used to give off a very blue, what I like to describe as alien-UFO light.  The technology has improved so much that you can get warmer color temperatures that are flattering and comforting to have in your home.  Make sure to get the warm or soft white bulbs (2700K or 3000k).  They also have bulbs with globes around them so that they look like incandescent bulbs and you don’t see the squiggly tube.

Just screw in the bulbs into your regular fixture and you’re all done!

In conclusion, the next time one of your incandescent bulbs blows out, you should replace it with an energy efficient CFL bulb.  Contrary to what most people believe, CFL bulbs are inexpensive, will save you more money over the long run, and can offer a pleasing and warm atmosphere in your home. 

And!  I’d love to hear from any readers with strong feelings about using CFL bulbs?  

by Anjie Cho


eHow.com video: Professional Interior Decorating Scaling Tools

Professional Interior Decorating Scaling Tools

Professional Interior Decorating Scaling Tools

Watch my eHow.com video about how to use Professional Interior Decorating Scaling Tools, such as graph paper, T-square and architect's scale.  These tools are indispensable to architects!

see more eHow.com videos here

Video Transcript:

Hi, I'm Anjie Cho, and today I'd like to talk about the main professional tools typically used in interior design. Common scaling tools include graph paper, architect scale, T square and measuring tape.

When generating scaled drawings it's important that they're proportional to the actual space. Here's an example of a scale drawing and it's at quarter inch equals one foot. So for every quarter inch drawn, it represents one foot in the actual room. Graph paper with quarter inch by quarter inch spacing is often the easiest to work with for interior spaces. The graph paper makes it easy to lay out straight and diagonal lines and because it's already measured out, it can make things easier to draw a scaled drawing without the need for a straight edge. If I had an eight foot wall I would draw a line that was the length of eight squares because quarter inch or one square equals one foot. Graph paper is easy to find at art and office supply stores.

This is an architect scale. Which looks basically like a triangular ruler. Sometimes you might find flat ones like this that look like a regular ruler. Just like a standard ruler you can use architect scale to measure inches but it can also be used to measure in different increments such as quarter inch, half inch, three eighths, etc. These are great for drawing out a scaled room or to determine measurements from the scale drawing that you might get from your designer or architect.

Next is a T square. This is a technical drawing instrument that is used in drafting scale drawings. A T square makes your life a whole lot easier when drawing straight and orthagonal lines because it has this guide that's built in, and it aligns with the edge of your table or pad of paper. This way you can always draw rectangles and squares with 90 degree corners.

Finally the measuring tape. This is probably the most important tool because you need to be able to measure the space in question. Get as precise as possible at least to the quarter inch. There are a few different types of measuring tapes. I have a long 25 foot tape measure that's pretty versatile, it's good for most interior spaces. I also have a travel 12 footer. I never leave home without this. It's much lighter. You would do best with a 25 foot or 30 foot tape. It's much easier to use a tape measure with a metal tape that's curved. They're rigid and allow for more accurate measurements. Nowadays you can also find the pricier laser distance measures. They're precise and great for long distances. I use both the laser and the 25 foot together.

I'm Anjie Cho, interior architect with Anjie Cho architect and founder of Holistic Spaces and this has been professional interior decorating scaling tools. Happy measuring.

by Anjie Cho