The Secret to Flexible Decorating: the Picture Ledge

The Secret to Flexible Decorating- the Picture Ledge.jpg

Does this scenario sound familiar? You cuddle into the corner of your favorite chair. You pull a comfy throw onto your lap while closely hugging a cup of steaming tea, coffee or fire water. And you sigh, content and happy, until your eye rests upon that framed bit of artwork on the wall and you realize you’re ready for a change.

The good news is that the things we hang on our walls can be easily swapped out and updated for a fresh, new look. The challenge, however, can be finding a comparable piece to hang in that exact spot. Can the new piece use the same nail hole? Will it fit in the space of the item that you’re replacing? Will you need to create new holes in the wall for another sort of hanger? Do additional items need to be moved around to accommodate your new find? The more change this seemingly simple update requires, the more reluctant you may be to make it. 

Don’t worry! There’s a simple solution. Put down the hammer and don’t hang another thing before you read this. The secret to creating an easily updatable room is the picture ledge. Whether you like to replace your wall art each season or you want the flexibility to change things up on a whim, a picture ledge gives you a creative space to easily swap pieces without drilling new holes in the wall and alleviates spacing headaches each time your décor evolves. 

Let’s talk about the basics. Start by selecting the ledge length that best suits your decorating style and room size. You can find pre-made ledges in a variety of lengths or you can DIY a ledge to your specifications. If you’re going the make-it-yourself route, get creative with the materials you use. Pinterest is a great place to find inspiration and decorations for such a project. 

Generally, if you’re going to place the picture ledge over a couch, place the bottom edge of the shelf about 10 inches above the back of the couch. If you’re going to hang it elsewhere, keep in mind, you’re aiming for “eye level” artwork on a wall. A good rule of thumb is to hang your ledge 4 to 4 ½ feet from the floor. 

What goes on the ledge? For starters, there’s the obvious framed artwork. It is, after all, called a picture ledge. But don’t stop there! These ledges with their grooves and/or framed edges are ideal for displaying things like decorative plates, forward facing books, thin vases, and collectibles. Think outside the box! Hang some picture ledges in your bedroom and display your favorite shoes. Use these unique shelves in the kitchen to arrange your go-to bottles of spices and seasonings. Try a picture ledge in a child’s bedroom or play room to display those awesome Lego creations and favorite toys. Anything that will securely fit on the flat space available is fair game. Have fun with it, and the next time you glance up and realize it’s time for a change, go for it! Swap out your old shelf décor for something fresh and new without any worry.

by Anjie Cho


Dents, Holes and Pops: Prepping Your Walls for Paint

There’s nothing quite like setting your brush down, sliding back into your favorite cozy space and admiring a well-painted room. Before you get to that point, however, there’s ‘pre-paint’ legwork that must be done, starting with the repair of holes in your wall. Before you crack open the bucket of joint compound and grab the joint knife, keep reading. Not all wall damage is created equal. 

Small Dings, Nail Holes and Dents

Before you break out the joint compound, scrap away any loose paint or other debris from the area you’re repairing. Using your joint knife, spread the compound over the small area requiring repair. You should completely fill in the damaged space. Using the joint knife, pull away excess compound to make it level with the rest of the wall. Allow the space to dry according to the directions on the package. Keep in mind that it may take as long as 24 hours, so plan your room renovations accordingly. Once the repaired section is dry, sand it smooth and get ready to paint!

Small Holes

Don’t confuse ‘small’ with the nail-sized holes mentioned above. We’re talking about the hole created from a doorknob that met a wall with a little more pop and punch than it ought to have. If you’ve got a repair about that size, you’re going to need a bit more than joint compound and sandpaper to fix things. Pick up a peel-and-stick patch to repair this type of damage. The patch is a screen covered by fiberglass. Remove the backing and press the patch into place over the hole. Now pull out your joint compound and joint knife. Cover the mesh patch with layers of compound being careful to smooth each layer and level it off with the wall. Plan on applying three coats in total, letting each coat dry before applying the next one. Once the final coat is dry, sand the repaired area smooth and flush with the rest of the wall. Now you’re ready to paint! 

Note: You can find repair kits with patches for holes up to about six inches. Some patches are mesh like the one described above. Others will be a reinforced center panel surrounded by self-sticking tape. Larger holes require a different approach that we’ll cover in a future blog article.

Nail Pops

When you look at your wall, do you see small protrusions about the size of a nail head? This happens when the nails used to affix drywall to the studs pull away from the wood. You’ve got two choices on how to repair this, but both begin with scrapping away the ‘popped’ bit of drywall until the head of the nail is exposed. One option is to drive the nail back into the stud. Once you’ve done that, drill a drywall screw into place slightly above the nail to reinforce the drywall. Alternately, you can remove the offending nail and replace it with the drywall screw above or below the original hole. Regardless of which option you select, make sure the nail head and screw are slightly recessed into the drywall creating a dimple. Grab that joint compound again and fill in the small holes created by the removed (or re-driven) nail and the new screw. As above, wait until it’s fully dry and then sand the compound down again for a smooth even finish.

by Anjie Cho


Marble Countertops: Are They Right for You?

Crisp. Cool. Distinctive. Elegant. If those words are describing countertops, we must be talking about white marble. Marble is a timeless classic that is right at home in a wide range of décor styles and rooms. Whether you’re looking to finish off your kitchen, upgrade your bathroom or incorporate a workstation in a home office, marble should be on your list for consideration. Like any material, marble has its pros and cons. 

Pros

  • Classic beauty – Marble is the Audrey Hepburn of countertops: classic, timeless beauty that exudes sophistication. It’s the only natural stone that comes in bright, crisp white, with or without grey veins running through it.
     
  • It’s got personality - As a natural stone, marble offers a unique, “no-two-are-alike” style that will give your countertop its own distinctive flair. Marble doesn’t conduct heat. It’ll remain cool to the touch, a welcome feature in kitchens and spa-like bathrooms alike. With age, marble takes on a patina. If you’re intrigued by a surface that tells the story of its lifespan with you, then marble is a terrific choice. 
     
  • Affordable – Unless you’re selecting a more rare variety of marble, this natural stone tends to be within a price range that's comparable to other countertop options. In some cases, it’s even more affordable than other natural stones. 

Cons

  • It’s a softy – The same thing that gives aged marble a story to tell may be a turn-off for some. Simply put, marble is prone to staining and scratching. Even with regular sealing, marble may show traces of the red wine you once spilled in the kitchen or hints of your favorite shade of blush on the bathroom counter.

Tips for living with marble

If the pros outweigh the cons for you (and for so many of us they do!), take note of these general maintenance tips:

  • Seal your marble and reseal it at least once a year (or sooner in high use areas). A sealer doesn’t mitigate stains and scratches, but it does give you some time to respond. A splash of wine on a well-sealed countertop that’s wiped up in due time might never leave a clue that it was there. 
     
  • Be gentle when cleaning. If you wouldn’t wash your hands with it, don’t use it on your marble. Avoid acidic cleaners and abrasive cleaners or pads. Marble prefers mild soaps (such as dish detergent) and warm water with a cloth or sponge. Need something a little tougher? Look for a natural stone cleaner.
     
  • When you’re choosing your marble countertop, opt for polished finishes over honed. Polished is more stain resistant, whereas honed is more porous and prone to staining. 

If your idea of the perfect countertop is one that retains the pristine, glossy shine from the day you bought it, then marble isn’t the right choice. Conversely, if you are attracted to a countertop loaded with unique character and beauty, classic marble may be for you!

by Anjie Cho