Sagging Sofa? Refresh Rather Than Replace.

There’s a time in every day when you want to kick off your shoes and sink into the welcome embrace of your favorite seat in the house. Over time, however, the well-loved and much used couch can show its age. If your once plump and lush sofa is looking more squished and sagging, follow these six steps to bring new life into your favorite seat. 

1. Snap a photo of your sofa.

While it’s always fun to admire your work with a good before/after visual, that’s not our goal here. Having a picture will help you reassemble the couch properly when you’re done. And if you’re going to spice things up with a few new throw pillows, having that snapshot for your designer or with you in the stores will come in handy, too!

2. Remove the seat cushions from the sofa.

The cushions likely have a zipper on the side that faces into the couch. Remove the covers. This is a good time to wash those! Just make sure you follow the directions on the tag. Go the eco-friendly route and air dry the covers outside. While you’ve got everything taken apart, vacuum the foam cushions and the base of your sofa. 

3. Inspect the frame of your sofa.

Is it in good shape? Are the springs looking worse for the wear? You may find the bones of your favorite coach are beyond your abilities to repair. If that’s the case, it might be time to find a new love. However, if the frame just needs a little TLC, one option is to place a sheet of plywood over the base of your seat. This will create a new platform for the cushions to sit on. Cut the platform to fit the base properly. Once you put your cushions back into place, you’ll never know the wood is there. 

4. Plump your back cushions up. 

Use Poly-fil batting and/or quilt batting to plump up the back cushions of your sofa. If the back cushions don’t come off the frame of your couch, they may still have a zipper at their base. That’s when you reach for the Poly-fil. Tuck generous handfuls of fill behind the existing pillow or foam. If you need help, use a ruler to get the stuffing into the corners and edges. Fill each cushion until you achieve your desired level of plump and comfy. 

If you can remove the cushions, wrap the foam with layers of quilt batting. Use spray adhesive to help hold each layer of batting in place. How many layers? That depends on how plush you want your seat and how much space you have between the existing cushion and the seat cover. You want your revitalized cushion to have a tight fit, but it still needs to get in the cover. 

5. Reassemble your sofa. 

Place the now clean and plumped cushions back into place. If you have any extra Poly-fil, freshen up your throw pillows before you place them back into place. Or take your sofa photo shopping, and pick up new throw pillows or fabric to make your own covers for the existing pillows.

6. Kick off your shoes and sink into your renewed, refreshed, favorite seat!

by Anjie Cho

The Sticky Secret to Painting Straight, Even Edges

You’ve spent time looking at paint swatches. You’ve hung your homemade poster board-sized samples on the wall, and then moved them to check your hue from various angles. You’ve spackled, sanded, and repaired. You’re armed with rollers and brushes and you’re ready to give your room new life with a fresh coat of paint. Right? Wait. There’s one more thing you need to do to paint like a pro: Tape. 

Let’s talk about this painter’s staple for a moment. A bit of magic, tape will ensure you get paint where you want it and not where you don’t. If you want clean, straight lines, you need to tape off your borders before you get started. 

The right stuff

Don’t rack your brain trying to figure out what you have at home already that might sub for the roll of tape in the paint department. If you don’t have a roll of this specific stuff, you’re going to need to buy one (or more). Painter’s tape is low-tack, which means it will go on and peel off without leaving sticky residue on your walls and trim. It also won’t pull away the finish you wish to keep. There are different tapes suited for specific surfaces. Read the label or ask the paint shop staff for help in selecting the right roll for your job. For example, you’ll find tape designed for multi-purpose use, as well as tape specifically designed with delicate walls in mind (think fresh dry wall or newly painted). To get off on the right foot, pick the tape that’s best suited for your job. 

Prep the wall

Before you stick the tape anywhere, take a damp sponge and wipe down the wall and trim. Let the surface dry before you proceed. The best painted walls start off clean, dry, and dust-free. 

Go long

You may think it’s more manageable to pull off several inches of tape and apply it to the surface you wish to protect. Not necessarily. Every juncture point is an open invitation for paint to seep through. On the other hand, you don’t want to peel off a huge swath of tape all at once. Work with 1 to 2 foot sections at a time. Be sure to overlap your tape segments to limit the aforementioned invite to seep. Don’t go too long, however. Pulling off large sheets can create sticky tangles and ineffective, overstretched tape that won’t lie properly. This would invite paint to bleed past your tape border as well.

Smooth it out

The goal of taping is a clean, sharp line. Make sure the tape lies flat at your border line. Press it down with your fingertip or a putty knife to secure the edges. 

Base coat it

To really seal the deal, use your brush to lightly paint a thin strip of your primer or wall color along the edge of your tape. 

Take it off

If you wait for your paint to fully dry to remove your tape, the paint may chip and create uneven lines. Start pulling your tape off when you put your brush down from the last swipe of color. Pull down and away gently at a 45- degree angle. If the tape isn’t peeling back cleanly, adjust your angle to 90 degrees and enlist the help of a sharp tool to cut (or score) the layer of paint between the finished wall and the tape you’re pulling away.

by Anjie Cho

Going Neutral: Layering Comfort and Versatility into Your Design

I want to share a designer’s secret with you. Ready? Here it is: neutral palettes are anything but dull and staid. Neutral color tones are expressive and alive with personality in the right hands. Before you pick up a paint brush or reach for a set of swatches, read this. 

Swath of Many Colors:

What’s the first hue you think of when someone mentions painting a room with a neutral? White? Beige? The truth is that the choices within the neutral color family are vast! You have your pick between subtle differences in the warm cream family like ivory, bone, alabaster and eggshell. Or move into the neighborhood of grey with its soft shades of dove, pewter and the bolder, more saturated tone of charcoal. Start with a base color that best suits your personal taste and the mood you’re looking to strike in the room. 

Layer It Up:

Build interest by layering colors in different shades or complementary hues. If you’ve painted your walls a light shade of gray, introduce depth with a carbon colored sofa or an area rug toned somewhere in between. Introduce texture and patterns with your upholstered pieces that play up the same color family. Look for wood tones that complement your aesthetic tastes and the color palette you’ve selected. Just be aware of what undertones are present in your wall color. If the neutral on your wall is broadcasting undertones of blue, layer in other hues that whisper blue also. 

Play with Pops:

The beauty of a neutral décor is that you can work in pops of color that are easily updated when you’re ready for something new. Perhaps your walls are a pleasing shade of ivory, your sofa is a lush chocolate and the wooden entertainment center is a rich, earthy hue. Greet spring with pillows in a mossy green, an area rug that plays into the soft, dawning shades of spring and a couple of throws light enough in weight and color tone to ward off the last fingers of winter’s chill. When you’re feeling like summer’s ready to sing indoors, swap out the pillows, rug and other accessories for colors that make you feel like you’re beach bound. 

Go Organic or Metallic:

Elements of nature feel as at home in a neutral room as metallics do. You’ve got the option to add accessories that harken back to nature. A sun-filled room may be a welcome space to show off your collection of beach-themed accessories like an antiqued jar filled with shells and sea glass while a hemp-braided rug rests on the floor. On the other hand, you may find brushed nickel and satin-finished silver tones complement your design taste. Either one will feel at home with a neutral color palette.

by Anjie Cho